Verifying The Hardware Installation - Cisco WAP571 Quick Start Manual

Verifying the Hardware Installation

5
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
Label Activity
Off
Power
Solid (Green)
Solid (Blue)
Flashing (Blue)
Solid (Red)
Off
LAN
Solid Green
Flashing Green
If you need help resolving a problem, visit the Cisco Support
N
OTE
Community at www.cisco.com/go/smallbizsupport.
Cisco WAP571 Wireless Access Point
Description
The WAP571 is out of power.
The Cisco WAP571 is normal; no wireless
client connected.
The Cisco WAP571 is normal; at least one
wireless client connected.
The Cisco WAP571 is upgrading the firmware.
The Cisco WAP571 fails to boot with both
firmware images.
No Ethernet link; FE Ethernet link is active or
10Mbps.
GE Ethernet link is active.
The WAP 571 is transmitting or receiving data.
6