Getting Started
Navigating the Web-Based Utility
Navigating the Web-Based Utility
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster
The web-based utility consists of the following five main windows:
•
Setup
•
Wireless
•
AP Mode
•
Administration
•
Status
Additional windows branch out from these main windows.
For a basic network setup, you may only need to use the following windows of the
web-based configuration utility:
•
Setup—Enter your basic network settings.
•
Management—Click Administration > Management and create a new
password to replace the default password (admin).
•
Wireless—To change the default SSID, click Wireless > Basic Settings
and make the necessary changes. To change the level of security, click
Wireless > Security and make the necessary changes.
Setup
This window allows you to configure the host name and IP address settings and to
set the time through the following windows:
•
Basic Setup—Configures the Host Name and IP Address settings for this
access point.
•
Time—Sets the time either manually, or automatically from a time server if
the access point can access the public internet.
5
16