Configuring Connection Control; Disabling Wireless Connection Control - Cisco WAP200 Administration Manual

Configuring the WAP200 Access Point
Configuring Wireless Settings
STEP 1
STEP 2
STEP 3
STEP 4
Cisco WAP200 Wireless-G Access Point with Power Over Ethernet and Rangebooster

Configuring Connection Control

The Wireless > Connection Control window displays the wireless connection
settings, and allows you to configure the Connection Control List to either permit
or block specific wireless client devices connecting to (associating with) the
access point.

Disabling Wireless Connection Control

You can use the Wireless Connection Control window to disable wireless
connection control.
To disable wireless connection control for your access point, follow these steps:
Click Wireless > Connection Control.
From the Select SSID drop-down menu, select the SSID of the wireless network
that you want to disable.
In the connection control section, click Disabled (default).
Click Save.
6
43