Menu: Configuring Stp - HP 4108GL Management And Configuration Manual

Spanning Tree Protocol (STP)

Menu: Configuring STP

Menu: Configuring STP
1.
2.
3.
)
Read-Only Fields
Figure 16-1. Example of the STP Configuration Screen
4.
5.
6.
16-4
From the Main Menu, select:
2. Switch Configuration . . .
4. Spanning Tree Operation
Press [E] (for ) to highlight the Spanning Tree Enabled parameter.
Edit
Press the Space bar to select Yes . (Yes in this field means to enable STP.)
If the remaining STP parameter settings are adequate for your network,
go to step 8.
Use [Tab] or the arrow keys to select the next parameter you want to change,
then type in the new value or press the Space Bar to select a value. (If you
need information on STP parameters, press [Enter] to select the Actions
line, then press H to get help.)
Repeat step 5 for each additional parameter you want to change.
Note: For information on the Mode parameter, see "STP Fast Mode" on
page 16-10.
Use this field to enable or disable STP.