Cli: Configuring Port Monitoring - HP 4108GL Management And Configuration Manual

Figure 17-19. How To Select a Monitoring Port
5. Use the Space bar to select the port to use for monitoring.
Use the downarrow key to move the cursor to the Action column for the
6.
individual ports and position the cursor at a port you want to monitor.
Press the Space bar to select Monitor for each port that you want moni-
7.
tored. (Use the downarrow key to move from one port to the next in the
Action column.)
8. When you finish selecting ports to monitor, press [Enter], then press [S] (for
Save) to save your changes and exit from the screen.
9. Return to the Main Menu.

CLI: Configuring Port Monitoring

Port Monitoring Commands Used in This Section
show monitor below
mirror-port page 17-26
monitor page 17-27
Monitoring and Analyzing Switch Operation
Move the cursor to the
Monitoring Port parameter.
Inbound Port Monitoring
(Only) on the Switch 4108
Port Monitoring Features
17-25