Using The Cli To Implement Configuration Changes - HP 4108GL Management And Configuration Manual

Procurve switch
Table of Contents

Advertisement

Switch Memory and Configuration

Using the CLI To Implement Configuration Changes

"permanent". When you are satisfied that the change is satisfactory, you can
make it permanent by executing the
suppose you use the following command to disable port 5:
The above command disables port 5 in the running-config file, but not in the
startup-config file. Port 5 remains disabled only until the switch reboots. If
you want port 5 to remain disabled through the next reboot, use
to save the current running-config file to the startup-config file in flash
memory.
Storing and Retrieving Configuration Files. You can store or retrieve a
backup copy of the startup-config file on another device. For more informa-
tion, see appendix A, "Transferring an Operating System or Startup-Config
File"
Using the CLI To Implement
Configuration Changes
The CLI offers these capabilities:
I
I
How To Use the CLI To View the Current Configuration Files. Use
show
status or Spanning Tree Protocol. However, to view either the entire startup-
config file or the entire running-config file, use the following commands:
I
I
N o t e
The
settings that differ from the switch's factory-default configuration.
5-4
Access to the full set of switch configuration features
The option of testing configuration changes before making them perma-
nent
commands to view the configuration for individual features, such as port
: Displays the current startup-config file.
show startup-config
write terminal
: Displays the current running-config file.
show startup-config
and
write terminal
command. For example,
write memory
commands display the configuration
write memory

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents