HP 4108GL Management And Configuration Manual page 37

Rebooting To Activate Configuration Changes. Configuration changes
for most parameters in the menu interface become effective as soon as you
save them. However, you must reboot the switch in order to implement a
change in the
to the Main Menu and select:
If you make configuration changes in the menu interface that require a reboot,
the switch displays an asterisk (*) next to the menu item in which the change
has been made. For example, if you change and save the value for the
VLANs to support
the VLAN Menu screen, and also next to the the
the Main Menu, as shown in figure 4-6:
Asterisk indicates
a configuration
change that
requires a reboot
in order to take
effect.
Reminder to
reboot the switch
to activate
configuration
changes.
Figure 2-7. Indication of a Configuration Change Requiring a Reboot
To activate changes indicated by the asterisk, go to the Main Menu and select
the
N o t e
Executing the
configuration changes indicated by an asterisk in the menu interface. That is,
only a reboot from the menu interface or a
CLI will activate a pending configuration change indicated by an asterisk.
Maximum VLANs to support parameter
2. Switch Configuration
8. VLAN Menu
.)
1. VLAN Support
parameter, an asterisk appears next to the
option.
Reboot Switch
command in the CLI does not affect pending
write memory
Using the Menu Interface
Rebooting the Switch
. (To access this parameter, go
VLAN Support
Switch Configuration . . .
or command from the
boot reload
Maximum
entry in
entry in
2-13