Web: Enabling Or Disabling Igmp - HP 4108GL Management And Configuration Manual

Multimedia Traffic Control with IP Multicast (IGMP)
CLI: Configuring and Displaying IGMP
Configuring the Querier Function. The default querier capability is
"enabled". This command disables or re-enables the ability for the switch to
become querier if necessary.
Syntax:
Default:

Web: Enabling or Disabling IGMP

In the web browser interface you can enable or disable IGMP on a per-VLAN
basis. To configure other IGMP features, telnet to the switch console and use
the CLI.
To Enable or Disable IGMP
1.
2.
3.
4.
5.
For web-based help on how to use the web browser interface screen, click on
the [?] button provided on the web browser screen.
15-10
[no] vlan <vid> ip igmp querier
Yes
Click on the Configuration tab.
Click on [Device Features].
If more than one VLAN is configured, use the VLAN pull-down menu to
select the VLAN on which you want to enable or disable IGMP.
Use the Multicast Filtering (IGMP) menu to enable or disable IGMP.
Click on [Apply Changes] to implement the configuration change.
Returns IGMP traffic to
"normal" priority.
Show command to display
results of above high-priority
commands.
Disables the querier function
on VLAN 1.
Show command to display
results of above querier
command.