Monitoring Stack Status - HP 4108GL Management And Configuration Manual

3.
4.
5.
6.
7.
8.

Monitoring Stack Status

Using the stacking options in the menu interface for any switch in a stack, you
can view stacking data for that switch or for all stacks in the subnet (broadcast
domain). (If you are using VLANs in your stack environment, see "Stacking
Operation with a Tagged VLAN" on page 13-46.) This can help you in such ways
as determining the stacking configuration for individual switches, identifying
stack Members and Candidates, and determining the status of individual
switches in a stack. See table 13-5 on page 13-27.
Table 13-5. Stack Status Environments
Screen Name
Stack Status (This Switch)
Stack Status (All)
Press [B] (for Back) to return to the Stacking Menu.
To display Stack Configuration menu for the switch you are moving, select
3. Stack Configuration
Press [E] (for Edit) to select the Stack State parameter.
Use the Space bar to select Member, then press [v] to move to the Com-
mander MAC Address field.
Enter the MAC address of the destination Commander and press [Enter].
Press [S] (for Save).
Commander
• Commander's stacking
configuration
• Data on stack Members:
– Switch Number
– MAC Address
– System Name
– Device Type
– Status
Lists devices by stack name
or Candidate status (if device
is not a stack Member).
Includes:
• Stack Name
• MAC Address
• System Name
• Status
HP Procurve Stack Management
HP Procurve Stack Management
Member
• Member's stacking configuration
• Member Status
• Data identifying Member's
Commander:
– Commander Status
– Commander IP Address
– Commander MAC Address
Same as for Commander.
Candidate
Candidate's stacking
configuration
Same as for
Commander.
13-27