HP 4108GL Management And Configuration Manual page 273

Figure 13-6. The Default Stack Configuration Screen
Move the cursor to the Stack State field by pressing [E] (for
4.
use the Space bar to select the
5. Press the downarrow key to display the Commander configuration fields
in the Stack Configuration screen.
Figure 13-7. The Default Commander Configuration in the Stack Configuration
Screen
6. Enter a unique stack name (up to 15 characters; no spaces) and press the
downarrow key.
7. Ensure that the Commander has the desired
the downarrow key:
• No (the default) prevents automatic joining of Candidates that
have their
Auto Join
Yes enables the Commander to automatically take a Candidate
•
into the stack as a Member if the Candidate has
the default Candidate setting) and does not have a previously
(
configured password.
8. Accept or change the transmission interval (default: 60 seconds), then
press [Enter] to return the cursor to the
Press [S] (for
9. Save ) to save your configuration changes and return to the
Stacking menu.
Your Commander switch should now be ready to automatically or manually
acquire Member switches from the list of discovered Candidates, depending
on your configuration choices.
HP Procurve Stack Management
HP Procurve Stack Management
Commander option.
Auto Grab
set to .
Yes
line.
Actions
Edit ). Then
setting, then press
set to
Auto Join Yes
13-15