Dynamic Channel Selection (Dcs) - Proxim AP-4000 User Manual

Advanced Configuration
Interfaces
Figure 4-12 Channel Blacklist Table
3. Click Edit in the Channel Blacklist Table
4. Set Blacklist Status to Enable.
Figure 4-13 Channel Blacklist Table - Edit Screen
• Wireless Distribution System: A Wireless Distribution system can be used to establish point-to-point (i.e. wireless
backhaul) connections with other access points. See
information.

Dynamic Channel Selection (DCS)

Dynamic Channel Selection (DCS) addresses two major requirements in Optimal Channel Configuration. Principally it
enables the on-the-fly channel change without requiring a system reboot on conditions like RADAR
Detection/Configuration change of Channel. In addition to this it houses the functionality to Monitor the Channel Health in
Wireless Distribution System (WDS)
AP-4000/4000M/4900M User Guide
for configuration
63