Wireless-A Or Wireless-B - Proxim AP-4000 User Manual

Advanced Configuration
SSID/VLAN/Security
The following list details the configurable MAC Access parameters.
• Operation Type: Choose between Passthru and Block. This determines how the stations identified in the MAC
Access Control Table are filtered.
– If set to Passthru, only the addresses listed in the Control Table will pass through the bridge.
– If set to Block, the bridge will block traffic to or from the addresses listed in the Control Table.
• MAC Access Control Table: Click Add to create a new entry. Click Edit to change an existing entry. Each entry
contains the following field:
– MAC Address: Enter the wireless client's MAC address.
– Comment: Enter an optional comment such as the client's name.
– Status: The entry is enabled automatically when saved (so the Status field is only visible when editing an entry).
You can also disable or delete entries by changing this field's value.
NOTE: For larger networks that include multiple Access Points, you may prefer to maintain this list on a centralized
location using the
Figure 4-62 MAC Access Configuration Screen

Wireless-A or Wireless-B

Each SSID can have its own Security Profile that defines its security mode, authentication mechanism, and encryption,
so that customers can have multiple types of clients (non-WEP, WEP, 802.1x, WPA, WPA-PSK, 802.11i, 802.11i-PSK) on
the same system separated per VLAN. See the
unique VLAN. In order for the AP to support multiple SSID/VLANs, VLAN Tagging must be enabled. These parameters
are configurable on the Wireless-A and Wireless-B screens.
Configuring an SSID/VLAN with VLAN Tagging Disabled
With VLAN tagging disabled (from the SSID/VLAN/Security > Mgmt VLAN tab), only one SSID can be configured per
interface. All parameters set on the Wireless-A or Wireless-B tab will be applied to that SSID.
1. Click SSID/VLAN/Security > Wireless-A or Wireless-B.
The SSID, VLAN, and Security Configuration page is displayed.
MAC Access Control Via RADIUS
Security Profile
AP-4000/4000M/4900M User Guide
Authentication.
section for more information. Each SSID can support a
144