Proxim AP-4000 User Manual page 149
Hide thumbs
Also See for AP-4000:
- User manual (270 pages) ,
- Specification sheet (2 pages) ,
- Configuration manual (6 pages)
Table of Contents
Advertisement
Advanced Configuration
SSID/VLAN/Security
Figure 4-66 SSID/VLAN Add Entries Screen (VLAN Tagging Enabled)
4. Enter a unique Network Name (SSID) between 1 and 32 characters. This parameter is mandatory.
NOTE: Do not use quotation marks (single or double) in the Network Name; this will cause the AP to misinterpret the
name.
5. Enter a unique VLAN ID. This parameter is mandatory.
•
A VLAN ID is a number from -1 to 4094. A value of -1 means that an entry is "untagged."
•
You can set the VLAN ID to "-1" or "untagged" if you do not want clients that are using a specific SSID to be
members of a VLAN workgroup. Only one "untagged" VLAN ID is allowed per interface.
•
The VLAN ID must match an ID used by your network; contact your network administrator if you need assistance
defining the VLAN IDs.
•
When VLAN is "untagged" and CMOB Status is enabled, the Converged Mobility (CMOB) functionality does not
work
6. Select the status of Closed System to control whether the SSID is advertised in the beacon and manage the way
probe requests are handled, as follows:
AP-4000/4000M/4900M User Guide
149
Advertisement
Table of Contents
