Proxim AP-4000 User Manual page 241

Command Line Interface (CLI)
Parameter Tables
Telnet Parameters
Name
Telnet
Telnet Management
Interface Bitmask
Telnet Port
Telnet Login Inactivity
Time-out
Telnet Session Idle
Time-out
Serial Port Parameters
Name
Serial
Baud Rate
Data Bits
Parity
Stop Bits
Flow Control
RADIUS Based Management Access Parameters
The RADIUS Based Management Access parameters allow you to enable HTTP or Telnet Radius Management Access,
enable or disable local user access, and configure the local user password.
The default local user ID is root and the default local user password is public. "Root" cannot be configured as a valid
user for RADIUS based management access when local user access is enabled.
Name
Radius Local User Status Integer
Radius Local User
Password
HTTP Radius
Management Access
Telnet Radius
Management Access
Type
Group N/A
Interface Bitmask 0 or 2 = No interfaces
(disable)
1 or 3 = Ethernet
4 or 6 = Wireless A
8 or 10 = Wireless B
12 = Wireless A & B
13 or 15 = All interfaces
(default is 15)
Integer User Defined
23 (default)
Integer 30 - 300 seconds
60 sec (default)
Integer 60 - 36000 seconds
900 sec (default)
Type
Group N/A
Integer 2400, 4800,9600
(default), 19200, 38400,
57600
Integer 8
Integer none
Integer 1
Value none (default)
xonxoff
Type
enable
disable
DisplayString User Defined
Integer enable
disable
Integer enable
disable
AP-4000/4000M/4900M User Guide
Value Access
R
RW
RW
RW
RW
Value Access
R
RW
R
R
R
RW
Value Access
RW
RW
RW
RW
CLI Parameter
telnet
telifbitmask
telport
tellogintout
telsessiontout
CLI Parameter
serial
serbaudrate
serdatabits
serparity
serstopbits
serflowctrl
CLI Parameter
radlocaluserstatus
radlocaluserpasswd
httpradiusmgmtaccess
telradiusmgmtaccess
240