Ethernet - Proxim AP-4000 User Manual
Hide thumbs
Also See for AP-4000:
- User manual (270 pages) ,
- Specification sheet (2 pages) ,
- Configuration manual (6 pages)
Table of Contents
Advertisement
Advanced Configuration
Interfaces
Ethernet
Select the desired speed and transmission mode from the drop-down menu. Half-duplex means that only one side can
transmit at a time and full-duplex allows both sides to transmit. When set to auto-duplex, the AP negotiates with its switch
or hub to automatically select the highest throughput option supported by both sides.
Figure 4-22 Ethernet Sub-tab
For best results, Proxim recommends that you configure the Ethernet setting to match the speed and transmission mode
of the device the Access Point is connected to (such as a hub or switch). If in doubt, leave this setting at its default,
auto-speed-auto-duplex. Choose between:
•
10 Mbit/s - half duplex or full duplex
•
100 Mbit/s - half duplex or full duplex
•
Auto speed - auto duplex
AP-4000/4000M/4900M User Guide
77
Advertisement
Table of Contents
