Mac Access - Proxim AP-4000 User Manual
Hide thumbs
Also See for AP-4000:
- User manual (270 pages) ,
- Specification sheet (2 pages) ,
- Configuration manual (6 pages)
Table of Contents
Advertisement
Advanced Configuration
SSID/VLAN/Security
Figure 4-61 Security Profile Table - Add Entries
MAC Access
The MAC Access sub-tab allows you to build a list of stations, identified by their MAC addresses, authorized to access
the network through the AP. The list is stored inside each AP within your network. Up to 1000 entries can be made in the
table.
To configure MAC Access Status for an SSID, click Configure>SSID/VLAN/Security>Wireless A or B. The MAC ACL
Status parameter configuration is available per SSID if Security Per SSID feature is enabled. The parameter gets
applied for all SSIDs when Security per SSID is disabled. Configuration of MAC ACL status is rebootable.
NOTE: When MAC ACL table is in Strict mode, any change done in the MAC ACL web page takes effect dynamically.
When not set to Strict, all the changes in the MAC ACL web page requires a reboot.
AP-4000/4000M/4900M User Guide
143
Advertisement
Table of Contents
