Link Test - Proxim AP-4000 User Manual

Monitoring
Mesh Statistics
Figure 5-12 Mesh Statistics Link Statistics Sub-Tab

Link Test

The Link Test tab allows you to run two types of Mesh link tests: Tree Type or Neighbor Type.
The Tree Type link test is initiated from the Portal to any point on the Mesh tree. The Mesh units involved in the test must
be in the "Active" state
The Neighbor Type link test is initiated from any Mesh unit and to any other Mesh unit in its neighbor list the is in the
"Connected"/"Active" state. The Mesh units involved in the test must be on the same channel.
AP-4000/4000M/4900M User Guide
164