Wireless Communication - Denso WAVE BHT-805BWB User Manual

3.5.2 Wireless Communication

Transmit data to host computer via the wireless LAN access point.
To perform wireless communication, it is necessary to configure the wireless local area network (wireless
LAN) at the BHT and access point.
The BHT-BASIC 4.0 Development Pack (Option) and BHT-BASIC 4.0 Transfer Utility (Option) software is
required.
Requests
• Point the antenna on top of the BHT toward the access point to improve communication performance.
• Communication may not be possible at the following locations.
1. In the vicinity of devices operating on the same 2.4 GHz waveband as the BHT such as microwave
ovens, industrial heating equipment, or high-frequency medical equipment.
2. In the vicinity of computers or household appliances such as refridgerators that emit
electromagnetic noise.
3. In the vicinity of metallic objects, in places with high levels of metallic dust, in rooms surrounded by
metal walls (metallic influence), or places where the BHT may be subject to strong impact.
Wireless
communication
Wireless LAN access point
Barcode Handy Terminal
33