Wireless Equipment - Denso BHT-800 Series Operator's Manual

direktive 1999/5/ES.
Slovensky: Firma DENSO WAVE INCORPORATED týmto vyhlasuje, že jej rádio- a telekomunikačný
terminál BHT-805BW obsahuje bezdrôtový sieťový (LAN) modul (typ DWWL001), ktorý spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi: Täten DENSO WAVE INCORPORATED vakuuttaa, että tämän tuotteen BHT-805BW sisältämä
langaton WLAN-moduli (tyyppi DWWL001) on direktiivin 1999/5/EY oleellisten vaatimusten ja sen tätä
tuotetta koskevien muiden ehtojen mukainen.
Svenska: Härmed intygar DENSO WAVE INCORPORATED att denna BHT-805BW innehåller en
trådlös LAN-modul (type: DWWL001), som står i överensstämmelse med de väsentliga egenskapskrav
och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG
Íslenska: Hér með lýsir DENSO WAVE hf. því yfir að þetta BHT-805BW inniheldur þráðlausa
staðarnetseiningu (tegund: DWWL001), sem er í samræmi við grundvallarkröfur og önnur viðeigandi
ákvæði reglugerðar 1999/5/EB.
Norsk: DENSO WAVE INCORPORATED erklærer med dette at denne BHT-805BW inneholder trådløst
LAN-nettverksmodul (type: DWWL001), som er i samsvar med regelverk og øvrige bestemmelser i
direktiv 1999/5/EC.
CE marking
For Australia and New Zealand
This BHT-805BW contains Wireless LAN Module（type：DWWL001）.
C-tick marking

Wireless Equipment

Precautions relating to the frequency used by this device
In addition to industrial, scientific, and medical equipment such as microwave ovens, static wireless
stations (permit required) used for mobile identification in places such as plant manufacturing lines and
specified low-power wireless stations (no permit required) operate on the same frequency band as this
device.
1. Before using this device, ensure that no static wireless stations or specified low-power wireless
stations for mobile identification are being used in the vicinity.
2. In the event of instances of electromagnetic interference from this device to a static wireless station
being used for mobile identification, either promptly alter the usage frequency, or halt the
electromagnetic discharge
3. If other problems arise due to reasons such as electromagnetic interference from this device to a
specified low-power wireless station being used for mobile identification, please contact DENSO
WAVE through QBdirect.
● Requests to system designers
Communication may not be possible depending on the environment in which the device is being
used. Ensure that problem-free communication is possible prior to use.
Use a program capable of retransmitting data if communication fails.
If the BHT is introduced into an environment in which a device using 2.4GHz waveband
electromagnetic waves is operating, or if another device using 2.4GHz waveband electromagnetic
waves is introduced following introduction of the system, run all devices and ensure that
communication with the BHT is possible prior to use.
Check communication once again prior to use if any changes are made to the usage environment
(addition of household appliances, movement or addition of shelves, equipment and so on) following
introduction of the system.
-16-