Changing The Default Settings; Procedure - Denso WAVE BHT-805BWB User Manual

3.4 Changing the Default Settings

The volume, vibrator, LCD display brightness and power save settings can be changed at the MENU screen.
Item
Used to set the volume of the speaker that notifies the user
when barcode scanning is complete.
VOLUME
The volume can be adjusted in 4 levels: Hi, Lo, Mid and Mute.
Used to turn ON/OFF the vibrator that notifies the user when
VIBRATOR
barcode scanning is complete.
Used to set the backlight brightness of the LCD display.
BRIGHTNESS
The brightness can be adjusted in 5 levels.
Used to set the backlight brightness of the LCD display during
BRIGHTNESS(PS)
power save mode. The brightness can be adjusted in 6 levels.
Used to set the time until the LCD display backlight is dimmed
POWER SAVE
when not in use in order to save power.
3.4.1

Procedure

1.
Hold down magic key M1 for at least 1 second.
The MENU screen displays
Barcode Handy Terminal
Details Setting
Mute→Lo→Mid→Hi
ON, OFF
Levels 1 to 5
Levels 0 to 5
1-second units
(max. 30 seconds)
29