Denso WAVE BHT-805BWB User Manual page 205

Message
The date and time settings
screen
entry.
The BHT displays this error
message and automatically
runs the execution program
from the point of start-up.
The message continues to
display.
If this error occurs, the
warning
times.
BHT Response
The
displays, awaiting integrated in the BHT has
stopped because:
- the battery cartridge had
- the battery cartridge had
Operation was terminated
without turning OFF the
power normally with the
resume function set, and
therefore resume info has
been lost. The application
restarts
beginning.
After
abnormally, the BHT has
been
battery cartridge loaded,
or with discharged battery
cartridge
unsaved data was lost.
During
tone beeps five System
System
attempted to write onto
the write-protected area
of the memory.
(xxxxxxxx: Error address)
Barcode Handy Terminal
Cause
calendar clock Set the current date and
time. (Refer to "Chapter 2
BHT Preparation" – "2.4
Initial Setup")
been removed for a
long time,
not been recharged for
a long time.
If
frequently,
system administrator.
from the
shut down Contact
administrator.
left without the
loaded, so
execution of Unload
Program, the battery cartridge, then turn
Program has the BHT on.
If
frequently, make a note of
the displayed message and
codes
system administrator.
Countermeasure
this error occurs
contact your
your system
and reload the
this error occurs
and contact your
189