Denso WAVE BHT-805BWB User Manual page 154

BHT-805BWB
8.
Press the ENT key or BS/C key to return to the SECURITY CONFIG menu.
Wireless Parameter Initialization
1.
Select "3: INITIALIZE" at the SET RF PARAMETER menu and
then press the ENT key.
The screen on the right displays.
To initialize wireless parameters:
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: Yes]
and then press the ENT key.
Wireless parameters are initialized and the screen returns to the SET RF
PARAMETER menu.
To cancel:
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2: No] and
then press the ENT key.
The screen returns to the SET RF PARAMETER menu.
EAP Authentication Option Setting
This setting can be used when the mode is set to other than "1: None" at the SET SECURITY MODE
menu.
1.
Press the SF key and dot key at the SECURITY CONFIG menu.
The screen on the right displays.
[1: EAP START]: EAP authentication start time
[2: authPeriod]:
[3: helpPeriod]:
[4: startPeriod]:
[5: maxStart]:
2.
Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5])
to highlight the item to be set and press the ENT key.
The mode changes to entry mode and the cursor displays.
3.
Enter each item with the numerical keys and press the ENT key.
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
4.
Press the BS/C key to return to the the SECURITY CONFIG menu.
138
Retry interval when there is no response
Retry interval when authentication fails
Start retry interval
Start retry count