Denso WAVE BHT-805BWB User Manual page 106

BHT-805BWB
[11] Setting the operation log
The BHT-800 series is compliant with the BHT Manager software (host-side tool). The OPERATION LOG
sets wheter of not create log data that the BHT Manager collects.
For details, refer to the "BHT Manager User's Manual". The following explains only the operation of this
menu and an outline of the settings.
1.
Select "3: OPERATION LOG" from the SET SYSTEM Menu
2/2 and then press the ENT key.
The OPERATION LOG settings menu will display.
The highlighted setting will be the current setting.
2.
Use the cursor keys ([◄] [►]) to select each setting value,
and then press the ENT key.
"ON": An operation log file is created.
"OFF": An operation log file is not created.
3.
Press the ENT key.
The selected value will then be set.
90
ENT key