Denso WAVE BHT-805BWB User Manual page 152

BHT-805BWB
8.
Use the cursor keys ([▲] [▼]) or numerical key ([4]) to highlight [4: PASSWORD] and then
press the ENT key.
The mode changes to entry mode and the cursor displays.
9.
Use the numerical keys to enter a password and press the ENT key.
Press the SF and the BS/C key to change the entry mode (numerical entry (no guidance display) and
alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
10.
Use the cursor keys ([▲] [▼]) or numerical key ([5]) to highlight [5:
ROOT CERT] and then press the ENT key.
The screen on the right displays.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message displays if no files exist.
11.
Use the cursor keys ([▲] [▼]) or numerical key ([6]) to highlight [6:
CLIENT CERT] and then press the ENT key.
The same screen as that for [5: ROOT CERT] displays.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message displays if no files exist.
12.
Press the BS/C key to return to the SECURITY CONFIG menu.
13.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen on the right displays.
[1:CIPHER MODE]:
14.
Ensure that [1: CIPHER MODE] is highlighted and then select
TKIP or AES.
Select TKIP to use TKIP.
Select AES to use AES.
15.
Press the ENT key or BS/C key to return to the SECURITY
CONFIG menu.
136
Selects TKIP or AES.