Denso WAVE BHT-805BWB User Manual page 170

BHT-805BWB
7.
Use the cursor keys ([▲] [▼]) or numeric key ([1]) to highlight the
[1: DO IT] and then press the ENT key.
A serial port connection is started.
Press the Backspace/clear key to return to the SERIAL PORT MENU.
When the connection is established, the screen on the right is displayed.
[1: DOWNLOAD]:
[2: UPLOAD]:
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the desired menu and then press the
Enter key.
Press the Backspace/clear key to return to the SERIAL PORT MENU.
− Point − The protocols (Ymodem protocol, BHT protocol, or BHT-Ir protocol) used for the file transfer
are in accordance with the communication protocol setting specified in "4.5.6[5] Setting the
communication environment". The protocol option is in accordance with the option specified
in "[2] BLUETOOTH MENU (RF MENU)" – "File transfer protocol option setting".
If the serial port connection fails, the screen on the right is displayed.
Check the followings and retry the serial port connection.
・ The destination remote devices are in the vicinity.
・ The destination remote devices are ready for use.
・ The destination remote devices support the serial port profile.
・ The Bluetooth
・ The timeout period is sufficiently set.
Press the Backspace/clear key to return to the BROWSE DEVICE menu.
154
Transfers files from the host computer to the BHT.
Downloading between BHTs is also possible.
See the "4.5.3 Downloading Files (DOWNLOAD
Menu)" for details.
Transfers files from the BHT to the host computer.
Uploading between BHTs is also possible.
See the "4.5.4 Uploading Files (UPLOAD Menu)" for details.
®
passkey is correctly set.