Denso WAVE BHT-805BWB User Manual page 147

Wireless Security WPA-1x Mode
EAP authentication and an encryption system can be used with wireless security WPA-1x mode.
1.
Select "2: CONFIGURATION" at the SET SECURITY menu and
then press the ENT key.
The screen on the right displays.
[1: AUTH PARAM (EAP)]: EAP authentication parameter setting
[2: WPA CIPHER]:
Press the BS/C key to return to the SET SECURITY menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (EAP)] and then press the ENT key.
The screen on the right displays.
[1: EAP TYPE]:
[2: IDENTITY]:
[3: ANONYMOUS ID]: Anonymous ID
[4: PASSWORD]:
[5: ROOT CERT]:
[6: CLIENT CERT]:
3.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
EAP TYPE], and then use the cursor keys ([◄] [►]) to select PEAP
or EAP-TLS.
If PEAP is selected, a root certificate is used.
If EAP-TLS is selected, a root certificate and client certificate are used.
4.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
IDENTITY] and then press the ENT key.
The mode changes to entry mode and the cursor displays.
Encryption system setting
Selects PEAP or EAP-TLS.
ID
Password
Root certificate
Client certificate
Barcode Handy Terminal
[▲] key / [▼] key
131