Denso WAVE BHT-805BWB User Manual page 153

Wireless Security WPA2-PSK Mode
PSK authentication and an encryption system can be used with wireless security WPA2-PSK mode.
1.
Select "2: CONFIGURATION" at the SET SECURITY menu and
then press the ENT key.
The screen on the right displays.
[1: AUTH PARAM (PSK)]: PSK authentication parameter setting
[2: WPA CIPHER]:
Press the BS/C key to return to the SET SECURITY menu.
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (PSK)] and then press the ENT key.
The screen on the right displays.
[1:PRE SHARED KEY]:
3.
Ensure that [1: PRE SHARED KEY] is highlighted and then press
the ENT key.
The mode changes to entry mode and the cursor displays.
4.
Use the numerical keys to enter a shared key and press the ENT
key.
Press the SF key to change the entry mode (numerical entry (no guidance
display) and alphabet entry).
To delete a single character, press the BS/C key. To delete the entire entry,
press and hold the BS/C key, or press the SF key and BS/C key simultaneously.
5.
Press the BS/C key to return to the SECURITY CONFIG menu.
6.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlight [2:
WPA CIPHER] and then press the ENT key.
The screen on the right displays.
[1:CIPHER MODE]:
7.
Ensure that [1: CIPHER MODE] is highlighted and then select TKIP
or AES.
Select TKIP to use TKIP.
Select AES to use AES.
Encryption system setting
Sets the shared key.
Selects TKIP or AES.
Barcode Handy Terminal
137