Denso WAVE BHT-805BWB User Manual page 22

BHT-805BWB
• System Mode
This program is used to operate files, make system environment settings, and perform various types of
tests.
Refer to "Chapter 4 System Operation" –"4.4 System Mode" for further details.
Font File
These files are required to display JIS 1 and 2 standard Kanji characters at the BHT unit LCD display.
By using font files, the BHT unit is able to display 16 to 40 dot Kanji in application programs (*.PD4).
If you do not need to display Kanji characters, you may delete these JIS font files. After deletion, the
− Point −
memory area which was occupied by these files can be used as a user area. For the deleting
procedure, refer to "Chapter 4 System Operation" - "4.1.4 Performing System Initialization" or
"4.5.11 Deleting Font Files (DELETE FILE Menu)."
The names of the font file: FNTFSHG.FN4 (JIS Level 1 and 2 font, 16-dot to 40-dot)
User Programs
Application programs and data files are downloaded to the BHT user area and are collectively known
as user programs.
To download a BHT-BASIC 4.0 specification user program to the BHT unit, the BHT-BASIC 4.0
Transfer Utility is required.
6