Table of Contents
Advertisement
2.5 Turning OFF the Power
Use one of the following three methods to turn OFF the BHT power.
Normal power OFF
Turning the power OFF after data back-up
Auto power OFF
2.5.1 Normal Power OFF
1.
Press the Power key (
The BHT power turns OFF after the screen on the right displays.
Do not remove the battery cartridge while the
− Point −
message on the right is displayed.
When the power is next turned ON, there are times
when a message (2XXX ) displays asking the user
to contact the administrator.
2.5.2 Turning the Power OFF after Data Back-up
1.
Hold down the Power key (
The message right displays and data back-up is commenced.
The power turns OFF automatically when the back-up is complete.
Do not remove the battery cartridge while the
− Point −
message on the right is displayed.
The back-up process may take several tens of
seconds depending on the amount of data.
2.5.3 Auto Power OFF
The power turns OFF automatically when the BHT is not used for the length of time set at the user
program.
The default time is set to 3 minutes when the BHT is shipped from the factory.
* Refer to "BHT-800 Programmer's Manual" for details of auto power OFF.
→ Press the Power key (
→ Hold down the Power key (
→ The power turns OFF automatically when the BHT is not
used for a set length of time.
).
) for at least 3 seconds.
Barcode Handy Terminal
).
) for at least 3 seconds.
21
Advertisement
Chapters
Table of Contents
