Denso WAVE BHT-805BWB User Manual page 158

BHT-805BWB
Setting up the device detection parameters
1.
Select "2: INQUIRY" in the SET BLUETOOTH menu and then
press the ENT key.
The current settings are displayed.
[1: INQUIRY TIME]:
Sets up the duration of device detection in seconds.
[2: NUM RESPONSES]:
Sets up the number of devices to detect.
Press the Backspace/clear key to return to the SET BLUETOOTH menu.
2.
Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2]) to select the menu and then press the
ENT key.
Entry mode is activated and the cursor is displayed.
3.
Use the numeric keys to enter the desired value.
"INQUIRY TIME" ;
"NUM RESPONSES" ;
To delete a single character, press the Backspace/clear key. To delete the entire entry, press and hold the
Backspace/clear key or press the SF and Backspace/clear keys simultaneously.
4.
Press the ENT key.
5.
Press the Backspace/clear key to return to SET BLUETOOTH menu.
142
Valid Range: 0–255, Default: 10 seconds
Valid Range: 0–8, Default: 0
Detects a maximum of 8 devices when "0" is set.