2.5 Turning OFF the Power
You can turn OFF the BHT in one of the following three methods.
Normal power OFF
Turning the power OFF after data back-up
Auto power OFF
2.5.1 Normal Power OFF
1.
Press the Power key (
The BHT turns OFF after the message on the screen given to the
right displays.
Point
Do not remove the battery cartridge while the
message on the right is displayed.
When the power is next turned ON, there are times
when a message (2XXX ) displays asking the user
to contact the administrator.
2.5.2 Turning the Power OFF after Data Back-up
1.
Hold down the Power key (
The message right displays and data back-up is commenced.
The power turns OFF itself when the back-up is complete.
Point
Do not remove the battery cartridge while the
message on the right is displayed.
The back-up process may take several tens of
seconds depending on the amount of data.
2.5.3 Auto Power OFF
The power turns OFF itself when the BHT is not used for the specified period of time set at the user
program.
This is set to 3 minutes at default when the BHT is shipped from the factory.
* Refer to "BHT-600 Programmer's Manual" for details of auto power OFF.
Press the Power key (
Hold down the Power key (
The power turns OFF itself when the BHT is not used for
specified period of time set at the user program. .
).
) for at least 3 seconds.
Barcode Handy Terminal
).
) for at least 3 seconds.
21