Installing The Server Into The Cabinet; Install The Server Into The Cabinet - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

7. Tighten the left and right bottom screws in the rear of the cabinet.
Use the rack rail spacing bracket to align the slide assemblies as you tighten the
mounting screws.
Related Information
See "About the Slide Rail Assembly" on page 7
assemblies.

Installing the Server Into the Cabinet

Task
Slide the server into the cabinet.
Verify proper server installation.
Related Information
SPARC Enterprise T5440 Server Site Planning Guide
■
"Tools and Equipment Needed" on page 2
■
"About the Slide Rail Assembly" on page 7
■
"Rack Compatibility Requirements" on page 9
■
"Safety Precautions" on page 10
■

▼ Install the Server Into the Cabinet

The following procedure explains how to insert the server into the cabinet.
Caution – The weight of the server on extended slide rails can be enough to
overturn an equipment cabinet. Before you begin, deploy the antitilt feature on your
cabinet.
for more information about slide rail
Links
"Install the Server Into the Cabinet" on
page 19
"Verify Proper Slide-Rail Operation" on
page 21
Installing the SPARC Enterprise T5440 Server 19