Cable Management Arm
FIGURE:
Related Information
"Tools and Equipment Needed" on page 2
■
"Cabling Notes" on page 5
■
"About the Slide Rail Assembly" on page 7
■
"Rack Compatibility Requirements" on page 9
■
"Installing the Cable Management Arm (CMA)" on page 22
■
"Managing Cables With the CMA" on page 29
■
Rack Compatibility Requirements
The rackmount kit is compatible with equipment racks that meet the following
standards:
Four-post structure (mounting at both front and rear).
■
Rack horizontal opening and unit vertical pitch conforming to ANSI/EIA
■
310-D-1992 or IEC 60927 standards.
Preparing for Installation
9