Note – If your cabinet is equipped with square (unthreaded) mounting holes, install
the threaded mounting clips enclosed with the rackmount kit.
▼ Attach the Slide Rails to the Cabinet
Note – References to "left" or "right" in this procedure assume that you are facing
the front of the equipment rack.
Complete the following tasks:
"Attach the Inner Rails to the Server" on page 14
■
"Determine Rackmount Location" on page 16
■
1. Before attaching the slide rails to the rack, fully collapse the inner slide
assembly.
Slide the inner glide all the way into the slide rail assembly. Release the
spring-activated slide-rail lock. See
page
18.
FIGURE: Releasing the Slide Rail Lock on
Installing the SPARC Enterprise T5440 Server
17