Installing The Sparc Enterprise T5440 Server - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

Installing the SPARC Enterprise
T5440 Server
These topics provide instructions for installing the server into an equipment rack.
Note – If your rackmount kit came with its own instructions, use the instructions in
your rackmount kit instead of the instructions in this chapter. After performing the
server installation, proceed to
power on.
Topic
Installing the slide rail assembly
Installing the server into the cabinet and
making final adjustments to the slide rail
assembly
Installing the cable management arm
Connecting power and data cables to the
server
Using the cable management arm
"Powering On the System" on page 31
Links
"Installing the Rack Slide Assembly" on
page 14
"Installing the Server Into the Cabinet" on
page 19
"Installing the Cable Management Arm
(CMA)" on page 22
"Connecting the Server Cables" on page 25
"Managing Cables With the CMA" on
page 29
for first-time
13