Powering On The System - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

Powering On the System

This section includes instructions for booting the server and for enabling the service
processor network management port.
Topic
Connecting the AC power cords to a power
source
Configuring and enabling the network
management port for remote administration
Logging into the service processor
Powering on, powering off, and rebooting
remotely using the service processor
Booting the Solaris OS, and configuring the
system to not boot into the Solaris OS.
Related Information
"Preparing for Installation" on page 1
■
"Installing the SPARC Enterprise T5440 Server" on page 13
■
Links
"Powering On the System for the First
Time" on page 32
"Enabling the Service Processor Network
Management Port" on page 37
"Logging Into the Service Processor" on
page 39
"Using the Service Processor for Common
Operations" on page 45
"Booting the Solaris Operating System" on
page 49
31