Fujitsu SPARC Enterprise T5440 Installation And Setup Manual page 17

Task Warning
Installation Deploy the antitilt bar on the equipment rack before beginning an
installation.
Always load equipment into a rack from the bottom up so that it will not
become top-heavy and tip over.
The SPARC Enterprise T5440 server weighs approximately 88 lb (40 kg).
Two people are required to lift and mount this server into a rack
enclosure when using the procedures in this document.
When completing a two-person procedure, always communicate your
intentions clearly before, during, and after each step to minimize
confusion.
The weight of the server on extended slide rails can be enough to
overturn an equipment rack. Before you begin, deploy the antitilt feature
on your cabinet.
Caution – This indicates that hazardous voltages are present. To reduce the risk of
electric shock and danger to personal health, follow the instructions.
Task Warning
Installation Electric shock
There is a potential for electric shock if the server and related equipment
are not properly grounded.
Product Handling
Preface xv