Enabling The Service Processor Network Management Port - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

Related Information
SPARC Enterprise T5440 Server Administration Guide.
■
"Rear Panel Cable Connections Reference" on page 27
■
"Enabling the Service Processor Network Management Port" on page 37
■
"Logging Into the Service Processor" on page 39
■
"Using the Service Processor for Common Operations" on page 45
■
"Booting the Solaris Operating System" on page 49
■
Enabling the Service Processor Network
Management Port
The service processor network management port is not operational unless your
network employs DHCP, in which case the configuration in automatic.
Task
Enable the service processor network
management port.
Related Information
"Logging Into the Service Processor" on page 39
■
"Using the Service Processor for Common Operations" on page 45
■
"Rear Panel Cable Connections Reference" on page 27
■
Links
"Enable the Service Processor Network
Management Port in a Network Using DHCP"
on page 38
"Enable the Service Processor Network
Management Port with a Static IP Address"
on page 38
Powering On the System 37