Fujitsu SPARC Enterprise T5440 Installation And Setup Manual page 78

Hide thumbs Also See for SPARC Enterprise T5440:

Table of Contents

■

Note – The Solaris OS modifies the boot-device variable to its full path name, not

the alias name. If you choose a nondefault boot-device variable, the Solaris OS

specifies the full device path of the boot device.

Note – You can specify the name of the program to be booted as well as the way the

boot program operates. For more information, refer to the OpenBoot 4.x Command

Reference Manual in the OpenBoot Collection AnswerBook for your specific Solaris OS

release.

ok show-devs

ok show-nets

The show-devs command lists the system devices and displays the full path

name of each PCI device.

SPARC Enterprise T5440 Server Installation and Setup Guide • July 2009

disk1 – Specifies internal drive 1

disk2 – Specifies internal drive 2

disk3 – Specifies internal drive 3

net, net0, net1, net2, net3 – Specifies the network interfaces

full path name – Specifies the device or network interface by its full path name

If you want to specify a network interface other than an on-board Ethernet

interface as the default boot device, you can determine the full path name of

each interface by typing either of the following commands:

Table of Contents