Verify Proper Slide-Rail Operation - Fujitsu SPARC Enterprise T5440 Installation And Setup Manual

Hide thumbs Also See for SPARC Enterprise T5440:
Table of Contents

Advertisement

Slide the Server Into the Cabinet
FIGURE:

▼ Verify Proper Slide-Rail Operation

The server should slide smoothly in and out of the cabinet, without contacting any
other equipment installed in the cabinet.
1. Slowly pull the server out of the rack until the server locks in the service
position.
2. Press the release buttons and push the server back into the rack until the server
locks in the operational position.
Related Information
See
"About the Slide Rail Assembly" on page 7
assemblies.
To install or replace internal parts in the server, you must first remove the server
from the rack. For the removal procedure, refer to the SPARC Enterprise T5440 Server
Service Manual.
for more information about slide rail
Installing the SPARC Enterprise T5440 Server
21

Advertisement

Table of Contents
loading

Table of Contents