Blc; Setting The Light Measuring Area Characteristics (Size, Position And Distribution) For The Manual 1 Setting - Sanyo VCC-5974 Instruction Manual

3. BLC

3-1. Setting the light measuring area
characteristics (size, position and
distribution) for the MANUAL 1 setting
1
Set the BLC switch (9) to ON. The on-screen setting for BLC will
automatically switch to ON. Press the CURSOR (j or l) button
to select the on-screen ON setting (get it flashing), then press the
SET button. The adjustment sub-menu "ADJUSTMENT FOR BLC"
will be displayed.
ON CURSOR
OFF
2
Press the CURSOR (d or c) button until MANUAL 1 is
selected, then press the SET button. The adjustment
sub-menu "SIZE" will be displayed.
3
Press the CURSOR buttons to set the size of the area, then
press the SET button. The adjustment sub-menu "POSITION"
will be displayed.
CURSOR
ADJUSTMENT FOR BLC
(SIZE)
CURSOR
4
Press the CURSOR buttons to move (up, down, right, left) the area
to the desired position, then press the SET button. The adjustment
sub-menu "WINDOW WEIGHTING" will be displayed.
Note:
The WINDOW WEIGHTING default values are W0 : 1, W1 : 1, W2
: 3, W3 : 3, W4 : 15 (the value for W4 is fixed to 15 and cannot
be modified).
SET MENU FOR ADJUSTMENT
SYNC
IRIS
BLC
ADJUSTMENT FOR BLC
BLC MODE
PRESET1_PRESET2_MANUAL1_MANUAL2
CURSOR
(p)
CURSOR
(o)
ADJUSTMENT FOR BLC
(POSITION)
INT
AI
ON
MANUAL1
ADJUSTMENT FOR BLC
(SIZE)
SET
(l)
(j)
ADJUSTMENT FOR BLC
BLC MODE PRESET 1
ADJUSTMENT FOR BLC
(SIZE)
ADJUSTMENT FOR BLC
(POSITION)
WINDOW WEIGHTING
W0
W1
W2
W3
W4(FIX) 15
PRESET OFF
END MENU
18
English
1
1
3
3