Lan Setup - Planet VR-300 Series User Manual

Object
Load Balance Weight
External Connection
Detection
Detect Interval
Detect Link Up
Threshold
Detect Link Down
Threshold
Custom Detect Host

4.5.3 LAN Setup

This page is used to configure the parameters for local area network which connects to the LAN port of
your router as shown in
DHCP, etc.
Object
IP Address
Net Mask
Load Balance Weight allows you to set a relative weight (from 1 - 10)
for each WAN port.
Enable to detect the status of WAN connection.
Set the detect interval as you need.
The recommended value is 5 (default).
Set the times for detecting link up.
The recommended value is 8 (default).
Set the times for detecting link down.
The recommended value is 3 (default).
The host is used to check whether the internet connection is alive or
not.
Figure 4-30. Here you may change the settings for IP address, subnet mask,
Figure 4-30: LAN Setup
The LAN IP address of the router and default is 192.168.1.1.
Default is 255.255.255.0.
Enterprise 5-Port 10/100/1000T VPN Security Router
Description
Description
- 81 -
VR-300 series