Table of Contents
Advertisement
Please locate your PC in the same network segment
(192.168.0.x) of VIP-280/320. If you're not familiar with
TCP/IP, please refer to related chapter on user's manual CD
NOTE:
or consult your network administrator for proper network
configurations.
LAN/WAN Interface quick configurations
Nature of PLANET VIP-280/VIP-320 is an IP Sharing (NAT) device, it comes with two
default IP addresses, and default LAN side IP address is "192.168.0.1", default WAN side
IP address is "172.16.0.1". You may use any PC to connect to the LAN port of VIP-280/
VIP-320 to start machine administration.
Hint:
LAN IP address configuration via web configuration interface
Here we'd like to configure the IP address of VIP-110/VIP-210 LAN interface, LAN IP
address related commands are:
LAN IP Address:192.168.0.1
Subnet Mask:255.255.255.0
Default Gateway:192.168.0.254
Parameter Description
IP address LAN IP address of VIP-280/VIP-320
Default: 192.168.0.1
Subnet Mask LAN mask of VIP-280/VIP-320
Default: 255.255.255.0
Default Gateway Gateway of VIP-280/VIP-320
Default: 192.168.0.254
Hint:
After confirming the modification you've done, Please click on the Modify button to macke
the changes effective,
In general cases, the LAN IP address is the default gateway
of LAN side workstations for Internet access, and the WAN
IP of VIP-280/320 are the IP address for remote calling party
to connect with.
It is suggested to keep the DHCP server related parameters
in default state to keep machine in best performance.
5
Advertisement
Table of Contents
