Assembly (Brake Shoe Plate) - Yamaha YX600S Service Manual

NOTE:
~~~~~~~~~~~~~
Replace the brake shoes as a set if either is found
to be worn to the wear limit.
8. Inspect:
•Brake drum inner surface
Oil/Scratches-+ Remove.
Oil
Use a rag soaked in
lacquer thinner or solvent.
Scratches
Use a emery cloth
(lightly and evenly polishing)
9. Measure:
•Brake drum inside diameter
Out of specification-+Replace rear wheel.
Brake Drum Inside Diameter:
180 mm (7.08 in)
Wear Limit:
181 mm (7.12 in)
10. Inspect:
•Camshaft face
Wear-+ Replace.
ASSEMBLY (BRAKE SHOE PLATE)
When assemblying the brake shoe plate, reverse
the disassembly procedure.
Note the following points.
1. Apply:
•Lithium-soap base grease
(to the brake cam shaft)
5-10