Building Your Own Presets; Store User Presets - Zaxcom Deva 5.8 Owner's Manual

Chapter 3

Building Your Own Presets

In a lot of cases once you have setup monitoring options, you don't need to change them that often. But
once changed, the Deva allows you to with the push of a button, restore those settings. When stored,
these become known as User Presets.

Store User Presets

The following section provides instructions on storing monitoring presets. You can have up to 20 presets.
To store a preset, perform the following:
1. Setup the monitoring matrix.
2. Press the Store User Presets.
The Store User Preset Menu appears.
3. Press any unassigned preset button.
The on-screen keyboard appears.
4. Enter the name for your headphone preset.
You use up to eight (8) characters for your preset name. Press the Enter key when finished.
Note: The preset name does not immediately appear on the button. However, the next time you go into the Get User
Presets or Store User Presets menu, the name will appear on the button.
5. Press the menu button to return to the Headphone Mix menu.
The name of the preset appears above the headphone assignment buttons.
Deva 5.8 and Deva 16 Owner's Manual
36