Setting The Meter Labels - Zaxcom Deva 5.8 Owner's Manual

Deva 5.8 and Deva 16 Owner's Manual

Setting the Meter Labels

Range: Labels can be a maximum of 16 characters
Meter labels on the Home Screen do more than just provide an easy reference of what is on each track
when meters are displayed horizontally. This information is place into the metadata of the broadcast wave
file. This information can be used in automated sound reports, used by post-production and audio software
to label tracks.
Note: When the maximum character limit has been reached, any additional character is placed in the 16th character
position.
Main Menu > Deva Setup > Meters > Meter Labels
Figure 30
Main Menu > Deva Setup > Meters > Meter Labels > Meter Labels Menu
Figure 31
To change the meter labels, perform the following:
1. Press the Deva Setup button on the Main Menu screen.
The Deva Setup Screen appears.
2. Press the Meters button
The Meters Menu screen appears.
3. Press the Meter Labels button.
The Meter Labels Menu appears.
4. Press the Meter number button that you want to label.
A keyboard layout appears.
5. Press the letters to enter the label.
If you press the backspace key (Bsp) characters are removed from the label.
Hint: Using a PDA stylus, external keyboard, or the Deva MIX-12 with its built-in keyboard increases accuracy
and speed entering labels.
31
Meter Labels Button
Meter Labels Menu
Chapter 3