Overview - Valor Horizon 534ILN Installation And Operation Instructions Manual

Note: A non-combustible cement board is required
above the fi replace when converting to higher input
using the 534HNK/534HPK conversion kits. Refer to the
instructions provided with the conversion kits for details.
Remote Handset Wall Holder
Fire On/Off Wall Switch
(optional)
Required Front
(Contemporary Front 601SFB
shown—sold separately)
Wall Finish
May be combustible (see note
above). Finished wall surface
should be fl ush or slightly forward
of fi replace frame for most
applications. See instructions
provided with optional front trims.
Wall Finish
Flush
Forward
(534 recessed)
combustible. Install the bottom
of the heater fl ush with the
top of fi nished hearth for most
applications. See instructions
provided with optional front trims.
8 8
Hearth (if used) may be

Overview

Mantel—See Dimensions
section for mantel clearances
Combustible Floor Combustible framing allowed beneath fi replace.
When the appliance is installed directly on
carpeting, tile or other combustible material
other than wood fl ooring, the appliance shall be
installed on a metal or wood panel extending the
full width and depth of the appliance.
Framing—See Framing section
Field convertible
from top to rear
outlet
534IL