Table of Contents
Advertisement
Chapter 3
Consumable Replacement
Replacing The Waste Toner Bottle
When the "WASTE TONER FULL" message appears on the control
panel, replace the waste toner bottle by doing the following steps,
and discard the empty bottle. Do not reuse the bottle.
1. When paper motion stops, wait 15 seconds, then open the
printer upper doors. (See page 42.)
2. Open the waste toner recovery unit by pressing down on the
opening lever and pulling the door toward you.
46
2
Legend:
1)
Waste Toner Recovery Door
2)
Opening Lever
1
Advertisement
Table of Contents
