Table of Contents
Advertisement
Power supply
connector for power supply, in illustrated
parts list: Vol. 2 B–41
controller module
in illustrated parts list: Vol. 2 B–79
replacing: Vol. 1 4–100
corona
in illustrated parts list: Vol. 2 B–29
interface: Vol. 1 3–30
replacing: Vol. 1 4–138
DC
in illustrated parts list: Vol. 2 B–29,
B–81
replacing: Vol. 1 4–87
flash
adjustments: Vol. 1 3–63
capacitor, replacing: Vol. 1 4–82
failure: Vol. 2 7–89
in illustrated parts list: Vol. 2 B–29,
B–71
interface: Vol. 1 3–15
replacing: Vol. 1 4–78
high–voltage
in illustrated parts list: Vol. 2 B–29
interface: Vol. 1 3–30
replacing: Vol. 1 4–138
Power supply board, DC, replacing: Vol. 1
4–89
Power switch, location: Vol. 1 5–43
Precautions, safety: Vol. 1 1–4
Precharger
cleaning: Vol. 2 6–32
in illustrated parts list: Vol. 2 B–11
replacing: Vol. 1 4–49
Press paper rubber, in illustrated parts list:
Vol. 2 B–51
Print density, setting: Vol. 1 3–62
Print engine cable, in illustrated parts list:
Vol. 2 B–79
Index–20
Print head
LED
cleaning: Vol. 2 6–57
in illustrated parts list: Vol. 2 B–27,
B–35
setting density: Vol. 1 3–62
overheating, LED: Vol. 2 7–100
Print quality
maintaining: Vol. 2 6–3
problems: Vol. 2 6–3
Print quality problems: Vol. 2 6–3
Printer, setup: Vol. 1 5–1
Printer Control menu: Vol. 2 7–7
Bias Volts: Vol. 2 7–8
Fanfold X/Y Adj.: Vol. 2 7–8
LED Time: Vol. 2 7–8
Reset Stacker: Vol. 2 7–8
Surface Volts: Vol. 2 7–8
Printer features: Vol. 1 1–2
Printer operation (initial printer setup),
verifying: Vol. 1 5–44
Printer specifications: Vol. 2 A–1
electromagnetic interference: Vol. 2 A–7
emulations: Vol. 2 A–5
environment: Vol. 2 A–8
host interfaces: Vol. 2 A–5
memory requirements: Vol. 2 A–6
paper: Vol. 2 A–2
performance: Vol. 2 A–4
physical: Vol. 2 A–8
safety regulations: Vol. 2 A–7
Printing operations, theory: Vol. 1 2–38
Printouts, sample: Vol. 2 7–105
"skipped" area on printout: Vol. 2 7–112
"skipped" area on printout near perforation:
Vol. 2 7–120
carrier across entire printout: Vol. 2 7–126
continuous "skipped" area across narrow
width of printout: Vol. 2 7–130
continuous stain (main charger section):
Vol. 2 7–106
flaws on drum are developed: Vol. 2 7–108
Advertisement
Table of Contents
