Loading Flash Memory (If Equipped) - Printronix L5020 Maintenance Manual

Loading Flash Memory (If Equipped)

Printers not equipped with diskette drives have flash memory. The flash memory is
contained on a flash memory card located on the controller PCBA. Figure 3–38
shows how the 8 MB of flash memory is partitioned into two 4 MB partitions. Each
partition can store the emulation and other software for one virtual printer.
Size varies
Size varies
Size varies
Size varies
Size varies
Size varies
Printer emulation and operating system software are loaded into flash memory at the
factory, but you will install software or files in the following situations:
The customer buys the PGL or VGL graphics, Expansion-CT, or IPDS option
after the printer is installed
The customer needs to upgrade printer software
3–64
Emulation 1
Logos, forms,
additional fonts, etc.
for Emulation 1 (if any)
Unused memory
Emulation 2
Logos, forms,
additional fonts, etc.
for Emulation 2 (if any)
Unused memory
Figure 3–38. Virtual Printer Memory Usage
Virtual Printer 1
(4 MB Partition 1)
Virtual Printer 2
(4 MB Partition 2)
Electrical System and Adjustments
8 MB
Flash
Memory